Canada Well Data
Loading regions
Alberta 6,563 Registered Wells

Wheatland County Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In Wheatland County the median well is 143 feet deep and draws from Sand & Gravel Drift bedrock, which supplies 78% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

143 FT

Median for this area. Typical range 94–200 ft.

Est. Completion Cost

$12,768 CAD

$89/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 3/4 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Clay (0–1120+ ft)
Clay
40 ft (Shallow)Median 143 ft1120 ft (Deep)

Well Statistics

Local measurements compared against Alberta provincial benchmarks.

Hydrogeological Metric Local Measurement AB Provincial Benchmark
Total Registered Wells 6,563 1,420 avg per RM
Median Well Depth 143 ft 118 ft provincial median
Average Well Depth 160.1 ft 137.1 ft provincial average
Recorded Depth Range 3 – 1120 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand & Gravel Drift Mixed glacial till province-wide
Estimated Water Hardness 325 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,610 – $17,260 CAD $110/ft plus mobilization
Domestic Household Use 94% of wells 88% province-wide

Where This Report Applies

Approximate boundary of Wheatland County

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Wheatland County.

Depth Distribution

Most completed wells fall near the median depth of 143 ft.

0-50 ft
3% · 198
51-100 ft
23.1% · 1,517
101-150 ft
27.3% · 1,789
151-200 ft
19.2% · 1,257
201-250 ft
11.5% · 757
251-300 ft
6.6% · 435
301-400 ft
6% · 392
401+ ft
3.3% · 217

Median depth of 143 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sand & Gravel Aquifer 78%

5,119 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Glacial Drift Silt & Till 12%

788 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Carbonate Rock (Limestone/Dolomite) 7%

459 wells Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Undifferentiated Aquifer 3%

197 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand & Gravel Drift bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
788 wells · avg 136 ft
1970s
1,313 wells · avg 144 ft
1980s
1,444 wells · avg 152 ft
1990s
1,181 wells · avg 163 ft
2000s
919 wells · avg 173 ft
2010s
591 wells · avg 179 ft
2020s
328 wells · avg 184 ft

63% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, sand & gravel drift and a 143 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$3,337

Annual Consumables

$609

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in sand & gravel drift, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Sediment Prefilter

SpringWell Whole-House Spin-Down Sediment Filter

recommended

Sand & Gravel Drift aquifers carry fine sand and turbidity that destroys softener resin and UV lamp clarity.

Sizing
Prefilter, 20 micron, ahead of all treatment
Equipment
$749 CAD
Annual Consumables
None
03

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing
52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
04

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 143 ft in sand & gravel drift leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving Wheatland County?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in Wheatland County? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in Wheatland County. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in Wheatland County.

How deep are water wells in Wheatland County?

The average water well in Wheatland County, AB is 160.1 feet deep. Most wells range between 94.0 and 200.0 feet.

What is the primary aquifer in Wheatland County?

The most common aquifer tapped by drillers in Wheatland County is Sand & Gravel Drift.