Deka Lake Well Depths & Groundwater Data (233 Wells)

Bottom Line Up Front

In DEKA LAKE the median well is 212 feet deep and draws from Unknown bedrock, which supplies 97.4% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: standard regional mineral profile. Local sampling should confirm the unresolved formation profile.

Modelled Well Depth

212 FT

Median for this area. Typical range 164–273 ft.

Est. Completion Cost

$18,012 CAD

$85/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Standard regional mineral profile.

Pump class at this depth: 1 HP submersible, deep-set drop pipe

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Unknown (0–530+ ft)

Unknown

40 ft (Shallow)Median 212 ft530 ft (Deep)

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Hydrogeological Metric	Local Measurement	BC Provincial Benchmark
Total Registered Wells	233	1,420 avg per RM
Median Well Depth	212 ft	118 ft provincial median
Average Well Depth	226.2 ft	137.1 ft provincial average
Recorded Depth Range	31 – 542 ft	2 – 1,201 ft recorded range
Dominant Aquifer	Unknown	Mixed glacial till province-wide
Estimated Water Hardness	325 mg/L — Very Hard	210 mg/L provincial average
Est. Drilling Cost Range	$6,610 – $17,260 CAD	$110/ft plus mobilization
Domestic Household Use	94% of wells	88% province-wide

Where This Report Applies

Approximate boundary of DEKA LAKE

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire DEKA LAKE.

Depth Distribution

Most completed wells fall near the median depth of 212 ft.

0-50 ft

2.3% · 6

51-100 ft

3% · 8

101-150 ft

12.1% · 32

151-200 ft

28.3% · 75

201-250 ft

21.5% · 57

251-300 ft

15.1% · 40

301-400 ft

12.5% · 33

401+ ft

5.3% · 14

Median depth of 212 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Undifferentiated Aquifer 97.4%

227 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

Scale build-up in kettles, heaters and fixtures
Dissolved iron and manganese staining
Elevated calcium and magnesium from Unknown bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970

1 wells · avg 40 ft

1970s

7 wells · avg 191 ft

1980s

9 wells · avg 196 ft

1990s

19 wells · avg 255 ft

2000s

72 wells · avg 233 ft

2010s

72 wells · avg 240 ft

2020s

28 wells · avg 236 ft

13% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, unknown and a 212 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$2,039

Annual Consumables

$489

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in unknown, but your own well can sit well off that median.

Sizing: Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment: $349 CAD
Annual Consumables: $349 CAD

Shop this stage Budget option · $39 Premium option · $499

02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing: 52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment: $1,690 CAD
Annual Consumables: $140 CAD

Shop this stage

Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving DEKA LAKE?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in DEKA LAKE? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in DEKA LAKE. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in DEKA LAKE.

How deep are water wells in DEKA LAKE?

The average water well in DEKA LAKE, BC is 226.2 feet deep. Most wells range between 164.0 and 273.0 feet.

What is the primary aquifer in DEKA LAKE?

The most common aquifer tapped by drillers in DEKA LAKE is Unknown.