1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing British Columbia • 86 Registered Wells
Fraser Lake Water Well Depth & Hydrogeology
Regional groundwater summary • British Columbia Historical Log Extraction
Bottom Line Up Front
In Fraser Lake, the median completed well is 225 ft deep.
A published hardness range for this place and aquifer is less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on B.C. Ministry of Environment water-quality checks.
Most production draws from Bedrock (about 47% of local wells).
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Carbonate Bedrock (Limestone / Dolomite) (48–550+ ft)Primary Bedrock Aquifer
Modelled Depth
225 FT
Area median
Drilling cost
$15,750–$33,750
Estimate
Published hardness
less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃
0 ft (Surface)Median 225 ft550 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Carbonate Bedrock (Limestone / Dolomite)
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against British Columbia provincial benchmarks.
Total Registered Wells 86
Median Well Depth 225 ft
BC benchmark: 162 ft provincial median
Average Well Depth 234.0 ft
Dominant Aquifer Bedrock
Hardness less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks
Drilling cost $15,750–$33,750 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 87% of wells
| Hydrogeological Metric | From the registry or a cited study | BC Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 86 | — |
| Median Well Depth | 225 ft | 162 ft provincial median |
| Average Well Depth | 234.0 ft | — |
| Dominant Aquifer | Bedrock | — |
| Hardness | less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks | — |
| Drilling cost | $15,750–$33,750 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
| Domestic Household Use | 87% of wells | — |
Where This Report Applies
Approximate boundary of Fraser Lake
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Fraser Lake.
Depth Distribution
Most completed wells fall near the median depth of 225 ft. Recorded depths cover 84 wells.
0–49 ft 2.4% · 2
49–98 ft 15.5% · 13
98–148 ft 11.9% · 10
148–197 ft 7.1% · 6
197–295 ft 34.5% · 29
295–394 ft 13.1% · 11
394–591 ft 14.3% · 12
591+ ft 1.2% · 1
Median depth of 225 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Aquifer Composition
Bedrock and drift aquifers recorded by drillers in this area. Recorded for 50 of these 86 wells.
Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
46.5% 40 of 86 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.
Undifferentiated Aquifer Regional Formation
11.6% 10 of 86 Unclassified hydrogeological formation from legacy provincial drill records.
7 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃
Estimate. Estimate based on B.C. Ministry of Environment water-quality checks. Regional estimate, not a test of your well.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 1 wells
1970s 1 wells
1980s 4 wells
1990s 13 wells
2000s 7 wells
2010s 7 wells
2020s 19 wells
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Fraser Lake
Local Contractors
Licensed Water Well Drillers Serving Fraser Lake
Because water wells in Fraser Lake average 225 ft into bedrock, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Cariboo Water Wells Ltd.
Yard: Prince George, BC (136.4 km away)
Confirm the contractor's provincial licence before you hire
Northern BC Formations Large Diameter Casing Well Screens
Anderson Water Services Ltd.
Yard: Fort St. John, BC (350 km away)
Confirm the contractor's provincial licence before you hire
Peace River Region Wells High Yield Agricultural Overburden Screener
Carbon Mountain Drilling & Water Services
Yard: North Pine, BC (362.7 km away)
Confirm the contractor's provincial licence before you hire
Rotary Drilling Water Hauling & Systems Pressure Tank Setup
Bud’s Water Wells Ltd.
Yard: Kamloops, BC (492.7 km away)
Confirm the contractor's provincial licence before you hire
Interior BC Bedrock Submersible Pumps Pressure Tanks
Looking for more regional well drillers?
Explore all registered water well contractors operating across BC.
Featured Contractor Spot
Are you a licensed well driller serving Fraser Lake?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Fraser Lake.
What is the median well depth in Fraser Lake?
Among 84 producing water wells with a recorded depth, the median is 225.0 ft (68.58 m).
Which aquifer is recorded most often in Fraser Lake?
The most frequently recorded producing aquifer is Bedrock, on 40 of 50 wells with a producing aquifer name.
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths