Canada Well Data
Loading regions
Manitoba 1,184 Registered Wells

MUNICIPALITY OF PEMBINA Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In MUNICIPALITY OF PEMBINA the median well is 100 feet deep and draws from Odanah / Pierre Shale bedrock, which supplies 64.9% of wells here. Water is very hard at about 270 mg/L, so a softener is standard equipment. Rotary drilling is routine and 83.4% of wells serve ordinary household use. Treatment emphasis: elevated tds, sulfate, potential hydrogen sulfide (h2s). Fine shale layers raise sulfate and sulfide concerns.

Modelled Well Depth

100 FT

Median for this area. Typical range 55–150 ft.

Est. Completion Cost

$9,500 CAD

$95/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

270 MG/L

Very Hard. Elevated TDS, sulfate, potential hydrogen sulfide (H2S).

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Shale (10–925+ ft)
Shale
40 ft (Shallow)Median 100 ft925 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 1,184 1,420 avg per RM
Median Well Depth 100 ft 118 ft provincial median
Average Well Depth 109.7 ft 137.1 ft provincial average
Recorded Depth Range 4 – 925 ft 2 – 1,201 ft recorded range
Dominant Aquifer Odanah / Pierre Shale Mixed glacial till province-wide
Estimated Water Hardness 270 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,025 – $15,250 CAD $110/ft plus mobilization
Domestic Household Use 83% of wells 88% province-wide

Where This Report Applies

Approximate boundary of MUNICIPALITY OF PEMBINA

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire MUNICIPALITY OF PEMBINA.

Depth Distribution

Most completed wells fall near the median depth of 100 ft.

0-50 ft
23.4% · 259
51-100 ft
27.2% · 301
101-150 ft
25.9% · 286
151-200 ft
16.7% · 185
201-250 ft
4.2% · 46
251-300 ft
1.7% · 19
301-400 ft
0.4% · 4
401+ ft
0.5% · 6

Median depth of 100 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Odanah / Pierre Shale 64.9%

769 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Undifferentiated Aquifer 17.8%

211 wells Unclassified hydrogeological formation from legacy provincial drill records.

Sand & Gravel Aquifer 15.9%

188 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Glacial Drift Silt & Till 0.9%

11 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Carbonate Rock (Limestone/Dolomite) 0.4%

5 wells Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

270 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Odanah / Pierre Shale bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
198 wells · avg 103 ft
1980s
248 wells · avg 111 ft
1990s
126 wells · avg 113 ft
2000s
144 wells · avg 117 ft
2010s
111 wells · avg 107 ft
2020s
43 wells · avg 101 ft

46% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 270 mg/L hardness, odanah / pierre shale and a 100 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$2,039

Annual Consumables

$489

Softener Sizing

43,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 270 mg/L in odanah / pierre shale, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 270 mg/L (very hard) a 4-person household loads roughly 4.7k grains of hardness per day onto the plumbing.

Sizing
43,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving MUNICIPALITY OF PEMBINA?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in MUNICIPALITY OF PEMBINA? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in MUNICIPALITY OF PEMBINA. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in MUNICIPALITY OF PEMBINA.

How deep are water wells in MUNICIPALITY OF PEMBINA?

The average water well in MUNICIPALITY OF PEMBINA, MB is 109.7 feet deep. Most wells range between 55.0 and 150.0 feet.

What is the primary aquifer in MUNICIPALITY OF PEMBINA?

The most common aquifer tapped by drillers in MUNICIPALITY OF PEMBINA is SHALE.