Canada's Well Water Guide
Loading regions
Nova Scotia • 299 Registered Wells

Herring Cove Water Well Depth & Hydrogeology

Regional groundwater summary • Nova Scotia Historical Log Extraction

Bottom Line Up Front

In Herring Cove, the median completed well is 153 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (33–400+ ft)Glacial Drift Aquifer

Modelled Depth

153 FT

Area median

Drilling cost

$10,710–$22,950

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 153 ft400 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against Nova Scotia provincial benchmarks.

Total Registered Wells 299
Median Well Depth 153 ft
NS benchmark: 138 ft provincial median
Average Well Depth 183.2 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $10,710–$22,950 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 96% of wells

Where This Report Applies

Approximate boundary of Herring Cove

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Herring Cove.

Depth Distribution

Most completed wells fall near the median depth of 153 ft. Recorded depths cover 295 wells.

0–49 ft 4.7% · 14
49–98 ft 14.6% · 43
98–148 ft 26.1% · 77
148–197 ft 14.9% · 44
197–295 ft 21.4% · 63
295–394 ft 12.2% · 36
394–591 ft 6.1% · 18
591+ ft 0% · 0

Median depth of 153 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

4 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

under 60 to above 180 mg/L as CaCO₃

Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.

Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 0 wells on record
1970s 65 wells
1980s 98 wells
1990s 71 wells
2000s 33 wells
2010s 17 wells
2020s 1 wells

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Herring Cove

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
Local Contractors

Licensed Water Well Drillers Serving Herring Cove

Because water wells in Herring Cove average 153 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Bluenose Well Drilling Ltd.

Yard: Lawrencetown, NS (16.7 km away)

Confirm the contractor's provincial licence before you hire
Air Rotary Bedrock Drilling Hydrofracturing Submersible Pumps

L.E. Veinotte & Sons Ltd.

Yard: West Northfield, NS (80.7 km away)

Confirm the contractor's provincial licence before you hire
South Shore Rotary Drilling Submersible Water Pumps Pressure Tanks

Hub Well Drilling Ltd.

Yard: Salmon River, NS (94.5 km away)

Confirm the contractor's provincial licence before you hire
Rotary Drilling Casing Seals Water Pumps

K D Rogers Well Drilling Ltd.

Yard: Coldbrook, NS (97.4 km away)

Confirm the contractor's provincial licence before you hire
Domestic & Agricultural Wells Water Conditioning Well Inspection

Looking for more regional well drillers?

Explore all registered water well contractors operating across NS.

Featured Contractor Spot

Are you a licensed well driller serving Herring Cove?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Herring Cove.

What is the median well depth in ns-herring-cove?

Among 295 producing water wells with a recorded depth, the median is 152.9 ft (46.59 m).

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths