Canada's Well Water Guide
Loading regions
Ontario • 14,079 Registered Wells

Parry Sound Water Well Depth & Hydrogeology

Regional groundwater summary • Ontario Historical Log Extraction

Bottom Line Up Front

In Parry Sound, the median completed well is 190 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

Most production draws from Crystalline Bedrock (about 77% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (40–450+ ft)Glacial Drift Aquifer

Modelled Depth

190 FT

Area median

Drilling cost

$13,300–$28,500

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 190 ft450 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against Ontario provincial benchmarks.

Total Registered Wells 14,079
Median Well Depth 190 ft
ON benchmark: 103 ft provincial median
Average Well Depth 210.2 ft
Dominant Aquifer Crystalline Bedrock
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $13,300–$28,500 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 95% of wells

Where This Report Applies

Approximate boundary of Parry Sound

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Parry Sound.

Depth Distribution

Most completed wells fall near the median depth of 190 ft. Recorded depths cover 14,046 wells.

0–49 ft 3% · 419
49–98 ft 14.7% · 2,070
98–148 ft 19.1% · 2,676
148–197 ft 14.3% · 2,008
197–295 ft 22.6% · 3,169
295–394 ft 17.9% · 2,520
394–591 ft 8.1% · 1,142
591+ ft 0.3% · 42

Median depth of 190 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 14,008 of these 14,079 wells.

Precambrian Crystalline Bedrock (Granite) Crystalline Bedrock Aquifer
76.6%

10,790 of 14,079 Crystalline Canadian Shield rock. Yields soft, slightly acidic water with minimal dissolved solids, relying on secondary fracture networks for groundwater storage.

Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
13.3%

1,875 of 14,079 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Sand & Gravel Aquifer Glacial Drift Aquifer
8.1%

1,146 of 14,079 Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Glacial Lacustrine Clay & Silt Confining Aquitard
1%

147 of 14,079 Impermeable glaciolacustrine clay and silt deposits formed in ancient glacial lakes. Acts as an effective regional aquitard confining underlying aquifers.

Sandstone Bedrock Formation Basal Bedrock Aquifer
0.3%

41 of 14,079 Deep basal sandstone bedrock unit (including Winnipeg Formation). Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Sedimentary Shale Formation Fractured Shale Aquifer
0%

7 of 14,079 Fractured sedimentary shale formation (including Odanah / Pierre members). Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Undifferentiated Aquifer Regional Formation
0%

2 of 14,079 Unclassified hydrogeological formation from legacy provincial drill records.

1,295 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

under 60 to above 180 mg/L as CaCO₃

Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.

Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 1,053 wells
1970s 1,745 wells
1980s 2,491 wells
1990s 2,535 wells
2000s 2,765 wells
2010s 2,190 wells
2020s 1,251 wells

48% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Parry Sound

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
Local Contractors

Licensed Water Well Drillers Serving Parry Sound

Because water wells in Parry Sound average 190 ft into crystalline bedrock, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Drury Well Drilling Ltd.

Yard: Barrie, ON (141.4 km away)

Confirm the contractor's provincial licence before you hire
Simcoe County Bedrock Residential Drinking Wells Pump Diagnostics

Rhude Well Drilling

Yard: Greater Sudbury, ON (145.1 km away)

Confirm the contractor's provincial licence before you hire
Sudbury Basin Bedrock Shield Granite Drilling Hydrofracturing

G. Hart & Sons Well Drilling Ltd.

Yard: Fenelon Falls, ON (148.5 km away)

Confirm the contractor's provincial licence before you hire
Kawartha Lakes Cottage Wells Precambrian Granite Hydrofracturing

Jim Wilson Well Drilling Ltd.

Yard: Waterloo, ON (252.2 km away)

Confirm the contractor's provincial licence before you hire
Rotary Air & Mud Drilling Commercial High Yield Decommissioning

Looking for more regional well drillers?

Explore all registered water well contractors operating across ON.

Featured Contractor Spot

Are you a licensed well driller serving Parry Sound?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Parry Sound.

What is the median well depth in Parry Sound?

Among 14046 producing water wells with a recorded depth, the median is 190.0 ft (57.91 m).

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities