1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Prince Edward Island • 112 Registered Wells
Murray River Water Well Depth & Hydrogeology
Regional groundwater summary • Prince Edward Island Historical Log Extraction
Bottom Line Up Front
In Murray River, the median completed well is 80 ft deep.
A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Sand & Gravel Aquifer (18–400+ ft)Glacial Drift Aquifer
Modelled Depth
80 FT
Area median
Drilling cost
$5,600–$12,000
Estimate
Published hardness
under 60 to above 180 mg/L as CaCO₃
0 ft (Surface)Median 80 ft400 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against Prince Edward Island provincial benchmarks.
Total Registered Wells 112
Median Well Depth 80 ft
PE benchmark: 93 ft provincial median
Average Well Depth 85.0 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $5,600–$12,000 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
| Hydrogeological Metric | From the registry or a cited study | PE Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 112 | — |
| Median Well Depth | 80 ft | 93 ft provincial median |
| Average Well Depth | 85.0 ft | — |
| Hardness | under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands | — |
| Drilling cost | $5,600–$12,000 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
Where This Report Applies
Approximate boundary of Murray River
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Murray River.
Depth Distribution
Most completed wells fall near the median depth of 80 ft.
0–49 ft 3.6% · 4
49–98 ft 68.8% · 77
98–148 ft 23.2% · 26
148–197 ft 4.5% · 5
197–295 ft 0% · 0
295–394 ft 0% · 0
394–591 ft 0% · 0
591+ ft 0% · 0
Median depth of 80 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
under 60 to above 180 mg/L as CaCO₃
Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.
Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 0 wells on record
1970s 48 wells
1980s 23 wells
1990s 12 wells
2000s 0 wells on record
2010s 10 wells
2020s 19 wells
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Murray River
Local Contractors
Licensed Water Well Drillers Serving Murray River
Because water wells in Murray River average 80 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Reynolds Well Drilling
Yard: Lower Montague, PE (17.3 km away)
Confirm the contractor's provincial licence before you hire
Domestic Water Wells Pump Installations Well Deepenings
Moore Well Drilling Ltd.
Yard: Charlottetown, PE (51.9 km away)
Confirm the contractor's provincial licence before you hire
Residential & Cottage Wells Submersible Pumps Water Quality Profiling
Watson MacDonald Well Drilling
Yard: Cornwall, PE (51.9 km away)
Confirm the contractor's provincial licence before you hire
Queens County Sandstone Submersible Pumps Cottage & Residential Wells
Thompson Well Drilling
Yard: Kensington, PE (91.3 km away)
Confirm the contractor's provincial licence before you hire
Residential Domestic Wells Agricultural Irrigation Pressure Tanks
Looking for more regional well drillers?
Explore all registered water well contractors operating across PE.
Featured Contractor Spot
Are you a licensed well driller serving Murray River?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Murray River.
What is the median well depth in pe-murray-river?
Among 112 recorded wells with a recorded depth, the median is 80.0 ft (24.384 m).
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths