1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Quebec • 184 Registered Wells
Henryville Water Well Depth & Hydrogeology
Regional groundwater summary • Quebec Historical Log Extraction
Bottom Line Up Front
In Henryville, the median completed well is 62 ft deep.
A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Sedimentary Shale Formation (40–500 ft)Fractured Shale Aquifer
Modelled Depth
62 FT
Area median
Drilling cost
$4,340–$9,300
Estimate
Published hardness
under 60 to above 180 mg/L as CaCO₃
0 ft (Surface)Median 62 ft500.3280839895013 ft (Deep)
Undifferentiated Aquifer
Precambrian Crystalline Bedrock (Granite)
Sedimentary Shale Formation
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against Quebec provincial benchmarks.
Total Registered Wells 184
Median Well Depth 62 ft
QC benchmark: 156 ft provincial median
Average Well Depth 105.1 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $4,340–$9,300 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
| Hydrogeological Metric | From the registry or a cited study | QC Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 184 | — |
| Median Well Depth | 62 ft | 156 ft provincial median |
| Average Well Depth | 105.1 ft | — |
| Hardness | under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands | — |
| Drilling cost | $4,340–$9,300 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
Where This Report Applies
Approximate boundary of Henryville
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Henryville.
Depth Distribution
Most completed wells fall near the median depth of 62 ft.
0–49 ft 39.7% · 73
49–98 ft 26.6% · 49
98–148 ft 10.9% · 20
148–197 ft 4.3% · 8
197–295 ft 11.4% · 21
295–394 ft 4.3% · 8
394–591 ft 2.7% · 5
591+ ft 0% · 0
Median depth of 62 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
under 60 to above 180 mg/L as CaCO₃
Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.
Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 38 wells
1970s 40 wells
1980s 64 wells
1990s 15 wells
2000s 12 wells
2010s 14 wells
2020s 1 wells
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Henryville
Local Contractors
Licensed Water Well Drillers Serving Henryville
Because water wells in Henryville average 62 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Puits Bernier
Yard: Saint-Lin-Laurentides, QC (89.4 km away)
Confirm the contractor's provincial licence before you hire
Forage de Puits d'Eau Scellement au Bentonite Pompes Submersibles
GeoRocFor
Yard: Sherbrooke, QC (104.3 km away)
Confirm the contractor's provincial licence before you hire
Forage de Puits d'Eau Potable Géothermie Résidentielle Hydrofracturation
Groupe Boyer
Yard: Sainte-Adèle, QC (114.9 km away)
Confirm the contractor's provincial licence before you hire
Puits en Zone Montagneuse Analyses de Débit Raccordement Complet
R.J. Lévesque & Fils
Yard: Trois-Rivières, QC (144.3 km away)
Confirm the contractor's provincial licence before you hire
Puits Artésiens Mauricie Installation de Pompes Entretien & Nettoyage
Looking for more regional well drillers?
Explore all registered water well contractors operating across QC.
Featured Contractor Spot
Are you a licensed well driller serving Henryville?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Henryville.
What is the median well depth in qc-henryville?
Among 184 recorded wells with a recorded depth, the median is 62.0 ft (18.9 m).
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths