Canada Well Data
Loading regions
Quebec 52 Registered Wells

Hope Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In Hope the median well is 125 feet deep and draws from Crystalline Bedrock (Granite/Gneiss) bedrock, which supplies 84.6% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: low ph, slightly corrosive. Crystalline fractures favor low-alkalinity corrosion.

Modelled Well Depth

125 FT

Median for this area. Typical range 83–162 ft.

Est. Completion Cost

$11,400 CAD

$91/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Low pH, slightly corrosive.

Pump class at this depth: 3/4 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Shale (80–400+ ft)
Sandstone
Shale
40 ft (Shallow)Median 125 ft400 ft (Deep)

Well Statistics

Local measurements compared against Quebec provincial benchmarks.

Hydrogeological Metric Local Measurement QC Provincial Benchmark
Total Registered Wells 52 1,420 avg per RM
Median Well Depth 125 ft 118 ft provincial median
Average Well Depth 130.0 ft 137.1 ft provincial average
Recorded Depth Range 43 – 300 ft 2 – 1,201 ft recorded range
Dominant Aquifer Crystalline Bedrock (Granite/Gneiss) Mixed glacial till province-wide
Estimated Water Hardness 325 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,610 – $17,260 CAD $110/ft plus mobilization
Domestic Household Use 94% of wells 88% province-wide

Where This Report Applies

Approximate boundary of Hope

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Hope.

Depth Distribution

Most completed wells fall near the median depth of 125 ft.

0-50 ft
0% · 0
51-100 ft
22.9% · 8
101-150 ft
31.4% · 11
151-200 ft
28.6% · 10
201-250 ft
11.4% · 4
251-300 ft
2.9% · 1
301-400 ft
2.9% · 1
401+ ft
0% · 0

Median depth of 125 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Precambrian Crystalline Granite 84.6%

44 wells Eastern Manitoba crystalline rock. Yields soft, slightly acidic water with minimal dissolved solids.

Sand & Gravel Aquifer 9.6%

5 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer 5.8%

3 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Crystalline Bedrock (Granite/Gneiss) bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
0 wells on record
1980s
0 wells on record
1990s
2 wells · avg 165 ft
2000s
10 wells · avg 141 ft
2010s
12 wells · avg 159 ft
2020s
11 wells · avg 130 ft

3% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, crystalline bedrock (granite/gneiss) and a 125 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$4,479

Annual Consumables

$859

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Lead & Arsenic Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in crystalline bedrock (granite/gneiss), but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$499 CAD
Annual Consumables
$499 CAD
02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing
52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
03

Arsenic & Uranium Reduction

US Water Systems Whole-Home Arsenic & Heavy Metal Adsorption Filter

recommended

Fractured crystalline bedrock (granite/gneiss) is the Canadian setting where arsenic and uranium exceed guideline most often — neither has taste, colour or smell.

Sizing
Iron-oxide adsorption bed, sized on the lab result, whole-home
Equipment
$2,290 CAD
Annual Consumables
$220 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving Hope?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in Hope? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in Hope. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in Hope.

How deep are water wells in Hope?

The average water well in Hope, QC is 130.0 feet deep. Most wells range between 82.8 and 162.1 feet.

What is the primary aquifer in Hope?

The most common aquifer tapped by drillers in Hope is Crystalline Bedrock (Granite/Gneiss).