1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Quebec • 135 Registered Wells
Pike River Water Well Depth & Hydrogeology
Regional groundwater summary • Quebec Historical Log Extraction
Bottom Line Up Front
In Pike River, the median completed well is 75 ft deep.
A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Sedimentary Shale Formation (20–702 ft)Fractured Shale Aquifer
Modelled Depth
75 FT
Area median
Drilling cost
$5,250–$11,250
Estimate
Published hardness
under 60 to above 180 mg/L as CaCO₃
0 ft (Surface)Median 75 ft702.0997375328084 ft (Deep)
Glacial Lacustrine Clay & Silt
Precambrian Crystalline Bedrock (Granite)
Sedimentary Shale Formation
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against Quebec provincial benchmarks.
Total Registered Wells 135
Median Well Depth 75 ft
QC benchmark: 156 ft provincial median
Average Well Depth 98.9 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $5,250–$11,250 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
| Hydrogeological Metric | From the registry or a cited study | QC Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 135 | — |
| Median Well Depth | 75 ft | 156 ft provincial median |
| Average Well Depth | 98.9 ft | — |
| Hardness | under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands | — |
| Drilling cost | $5,250–$11,250 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
Where This Report Applies
Approximate boundary of Pike River
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Pike River.
Depth Distribution
Most completed wells fall near the median depth of 75 ft.
0–49 ft 28.9% · 39
49–98 ft 31.9% · 43
98–148 ft 22.2% · 30
148–197 ft 8.1% · 11
197–295 ft 4.4% · 6
295–394 ft 1.5% · 2
394–591 ft 2.2% · 3
591+ ft 0.7% · 1
Median depth of 75 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
under 60 to above 180 mg/L as CaCO₃
Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.
Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 31 wells
1970s 37 wells
1980s 36 wells
1990s 9 wells
2000s 5 wells
2010s 11 wells
2020s 6 wells
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Pike River
Local Contractors
Licensed Water Well Drillers Serving Pike River
Because water wells in Pike River average 75 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
GeoRocFor
Yard: Sherbrooke, QC (94.4 km away)
Confirm the contractor's provincial licence before you hire
Forage de Puits d'Eau Potable Géothermie Résidentielle Hydrofracturation
Puits Bernier
Yard: Saint-Lin-Laurentides, QC (98.1 km away)
Confirm the contractor's provincial licence before you hire
Forage de Puits d'Eau Scellement au Bentonite Pompes Submersibles
Groupe Boyer
Yard: Sainte-Adèle, QC (125 km away)
Confirm the contractor's provincial licence before you hire
Puits en Zone Montagneuse Analyses de Débit Raccordement Complet
R.J. Lévesque & Fils
Yard: Trois-Rivières, QC (144.2 km away)
Confirm the contractor's provincial licence before you hire
Puits Artésiens Mauricie Installation de Pompes Entretien & Nettoyage
Looking for more regional well drillers?
Explore all registered water well contractors operating across QC.
Featured Contractor Spot
Are you a licensed well driller serving Pike River?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Pike River.
What is the median well depth in qc-pike-river?
Among 135 recorded wells with a recorded depth, the median is 75.1 ft (22.9 m).
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths