1
Test kit
estimate, confirm with a lab testA test of your own well comes before any equipment. Test for coliform bacteria.
Water testing Quebec • 211 Registered Wells
Saint-Charles-de-Bellechasse Water Well Depth & Hydrogeology
Regional groundwater summary • Quebec Historical Log Extraction
Bottom Line Up Front
In Saint-Charles-de-Bellechasse, the median completed well is 154 ft deep.
A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.
These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.
Interactive Well Depth & Modeled Typical Strata
Drag the indicator line or tap a stratum below to read the recorded depth range
Drilling in: Sedimentary Shale Formation (30–450 ft)Fractured Shale Aquifer
Modelled Depth
154 FT
Area median
Drilling cost
$10,780–$23,100
Estimate
Published hardness
under 60 to above 180 mg/L as CaCO₃
0 ft (Surface)Median 154 ft450.1312235834717 ft (Deep)
Undifferentiated Aquifer
Precambrian Crystalline Bedrock (Granite)
Sedimentary Shale Formation
Modeled typical strata:
Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.
Well Statistics
Local measurements compared against Quebec provincial benchmarks.
Total Registered Wells 211
Median Well Depth 154 ft
QC benchmark: 156 ft provincial median
Average Well Depth 154.3 ft
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $10,780–$23,100 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
| Hydrogeological Metric | From the registry or a cited study | QC Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 211 | — |
| Median Well Depth | 154 ft | 156 ft provincial median |
| Average Well Depth | 154.3 ft | — |
| Hardness | under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands | — |
| Drilling cost | $10,780–$23,100 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot | — |
Where This Report Applies
Approximate boundary of Saint-Charles-de-Bellechasse
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Saint-Charles-de-Bellechasse.
Depth Distribution
Most completed wells fall near the median depth of 154 ft.
0–49 ft 16.1% · 34
49–98 ft 11.8% · 25
98–148 ft 18.5% · 39
148–197 ft 19.9% · 42
197–295 ft 25.6% · 54
295–394 ft 7.1% · 15
394–591 ft 0.9% · 2
591+ ft 0% · 0
Median depth of 154 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Water Quality Profile
A published hardness range, when one exists for this place and aquifer. Not a test of your well.
Estimate
under 60 to above 180 mg/L as CaCO₃
Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.
Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.
No measured government test within 25 km. Test your water.
Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)
USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.
What this is not
- Not a laboratory result for a well on your property.
- Not a reason to size a softener. Size equipment from a lab test.
- Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.
Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.
Drilling Activity
Historical permit and construction activity by decade.
Pre-1970 109 wells
1970s 48 wells
1980s 4 wells
1990s 14 wells
2000s 15 wells
2010s 8 wells
2020s 13 wells
Treatment
Size treatment from a laboratory test
This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.
Suggested system
Suggested system for Saint-Charles-de-Bellechasse
Local Contractors
Licensed Water Well Drillers Serving Saint-Charles-de-Bellechasse
Because water wells in Saint-Charles-de-Bellechasse average 154 ft, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.
Le Groupe F. Lapointe Québec
Yard: Vallée-Jonction, QC (43 km away)
Confirm the contractor's provincial licence before you hire
Puits Artésiens Résidentiels Hydrofracturation Géothermie
R.J. Lévesque & Fils
Yard: Trois-Rivières, QC (134.1 km away)
Confirm the contractor's provincial licence before you hire
Puits Artésiens Mauricie Installation de Pompes Entretien & Nettoyage
GeoRocFor
Yard: Sherbrooke, QC (167.5 km away)
Confirm the contractor's provincial licence before you hire
Forage de Puits d'Eau Potable Géothermie Résidentielle Hydrofracturation
Puisatier Régional
Yard: Lac-Kénogami, QC (178.9 km away)
Confirm the contractor's provincial licence before you hire
Forage au Roc Saguenay Puits de Chalet & Résidentiel Scellement Conforme
Looking for more regional well drillers?
Explore all registered water well contractors operating across QC.
Featured Contractor Spot
Are you a licensed well driller serving Saint-Charles-de-Bellechasse?
Claim your verified listing profile and be found by homeowners on this report.
Frequently Asked Questions
Quick answers about water wells in Saint-Charles-de-Bellechasse.
What is the median well depth in qc-saint-charles-de-bellechasse?
Among 211 recorded wells with a recorded depth, the median is 153.9 ft (46.9 m).
Adjacent Municipalities & Nearby Well Records
Explore neighbouring hydrogeological formations and compare drilling depths