Canada Well Data
Loading regions
Quebec 152 Registered Wells

Sainte-Marie-Salomé Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In Sainte-Marie-Salomé the median well is 80 feet deep and draws from Crystalline Bedrock (Granite/Gneiss) bedrock, which supplies 84.9% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: low ph, slightly corrosive. Crystalline fractures favor low-alkalinity corrosion.

Modelled Well Depth

80 FT

Median for this area. Typical range 65–125 ft.

Est. Completion Cost

$7,980 CAD

$100/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Low pH, slightly corrosive.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Bedrock (40–90 ft)
Bedrock
Limestone
40 ft (Shallow)Median 80 ft400 ft (Deep)

Well Statistics

Local measurements compared against Quebec provincial benchmarks.

Hydrogeological Metric Local Measurement QC Provincial Benchmark
Total Registered Wells 152 1,420 avg per RM
Median Well Depth 80 ft 118 ft provincial median
Average Well Depth 97.4 ft 137.1 ft provincial average
Recorded Depth Range 18 – 250 ft 2 – 1,201 ft recorded range
Dominant Aquifer Crystalline Bedrock (Granite/Gneiss) Mixed glacial till province-wide
Estimated Water Hardness 325 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,610 – $17,260 CAD $110/ft plus mobilization
Domestic Household Use 94% of wells 88% province-wide

Where This Report Applies

Approximate boundary of Sainte-Marie-Salomé

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Sainte-Marie-Salomé.

Depth Distribution

Most completed wells fall near the median depth of 80 ft.

0-50 ft
5.9% · 2
51-100 ft
44.1% · 15
101-150 ft
29.4% · 10
151-200 ft
17.6% · 6
201-250 ft
0% · 0
251-300 ft
2.9% · 1
301-400 ft
0% · 0
401+ ft
0% · 0

Median depth of 80 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Precambrian Crystalline Granite 84.9%

129 wells Eastern Manitoba crystalline rock. Yields soft, slightly acidic water with minimal dissolved solids.

Sand & Gravel Aquifer 9.9%

15 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer 5.3%

8 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Crystalline Bedrock (Granite/Gneiss) bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
0 wells on record
1980s
2 wells · avg 175 ft
1990s
4 wells · avg 115 ft
2000s
15 wells · avg 94 ft
2010s
10 wells · avg 84 ft
2020s
3 wells · avg 180 ft

12% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, crystalline bedrock (granite/gneiss) and a 80 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$5,028

Annual Consumables

$979

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Lead & Arsenic Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in crystalline bedrock (granite/gneiss), but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$499 CAD
Annual Consumables
$499 CAD
02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing
52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
03

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 80 ft in crystalline bedrock (granite/gneiss) leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
04

Arsenic & Uranium Reduction

US Water Systems Whole-Home Arsenic & Heavy Metal Adsorption Filter

recommended

Fractured crystalline bedrock (granite/gneiss) is the Canadian setting where arsenic and uranium exceed guideline most often — neither has taste, colour or smell.

Sizing
Iron-oxide adsorption bed, sized on the lab result, whole-home
Equipment
$2,290 CAD
Annual Consumables
$220 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving Sainte-Marie-Salomé?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in Sainte-Marie-Salomé? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in Sainte-Marie-Salomé. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in Sainte-Marie-Salomé.

How deep are water wells in Sainte-Marie-Salomé?

The average water well in Sainte-Marie-Salomé, QC is 97.4 feet deep. Most wells range between 65.0 and 125.0 feet.

What is the primary aquifer in Sainte-Marie-Salomé?

The most common aquifer tapped by drillers in Sainte-Marie-Salomé is Crystalline Bedrock (Granite/Gneiss).