Canada's Well Water Guide
Loading regions
Saskatchewan • 98 Registered Wells

Prince Albert Water Well Depth & Hydrogeology

Regional groundwater summary • Saskatchewan Historical Log Extraction

Bottom Line Up Front

In Prince Albert, the median completed well is 41 ft deep.

A published hardness range for this place and aquifer is under 60 to above 180 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on Health Canada hardness bands.

Most production draws from 10 (about 2% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Sand & Gravel Aquifer (15–400+ ft)Glacial Drift Aquifer

Modelled Depth

41 FT

Area median

Drilling cost

$2,870–$6,150

Estimate

Published hardness

under 60 to above 180 mg/L as CaCO₃

0 ft (Surface)Median 41 ft400 ft (Deep)
Topsoil & Surficial Organics
Sand & Gravel Aquifer
Sand & Gravel Aquifer
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against Saskatchewan provincial benchmarks.

Total Registered Wells 98
Median Well Depth 41 ft
SK benchmark: 89 ft provincial median
Average Well Depth 50.6 ft
Recorded Depth Range 16 – 326 ft
Dominant Aquifer 10
Hardness under 60 to above 180 mg/L as CaCO₃ — Estimate. Estimate based on Health Canada hardness bands
Drilling cost $2,870–$6,150 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 89% of wells

Where This Report Applies

Approximate boundary of Prince Albert

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Prince Albert.

Depth Distribution

Most completed wells fall near the median depth of 41 ft. Recorded depths cover 95 wells.

0–49 ft 61.1% · 58
49–98 ft 32.6% · 31
98–148 ft 3.2% · 3
148–197 ft 1.1% · 1
197–295 ft 1.1% · 1
295–394 ft 1.1% · 1
394–591 ft 0% · 0
591+ ft 0% · 0

Median depth of 41 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 2 of these 98 wells.

Undifferentiated Aquifer Regional Formation
2%

2 of 98 Unclassified hydrogeological formation from legacy provincial drill records.

19 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

under 60 to above 180 mg/L as CaCO₃

Estimate. Estimate based on Health Canada hardness bands. Regional estimate, not a test of your well.

Health Canada. Guidelines for Canadian Drinking Water Quality: Operational Parameters.

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 19 wells · avg 44 ft
1970s 18 wells · avg 56 ft
1980s 23 wells · avg 42 ft
1990s 21 wells · avg 55 ft
2000s 7 wells · avg 58 ft
2010s 7 wells · avg 64 ft
2020s 3 wells · avg 56 ft

73% of dated wells are over 30 years old (pre-1995). Steel casing installed before 1995 can lose integrity over time. Any older well should get a casing inspection and a certified bacterial test before reliance.

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Prince Albert

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
Local Contractors

Licensed Water Well Drillers Serving Prince Albert

Because water wells in Prince Albert average 41 ft into 10, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

Pioneer Water Well Drilling Inc.

Yard: Prince Albert, SK (5.1 km away)

Serves Prince Albert
Confirm the contractor's provincial licence before you hire
Boreal Forest Shield Fringes Glacial Sand Aquifers Cottage & Residential Wells

Wolverine Drilling Inc.

Yard: Humboldt, SK (119.6 km away)

Serves Prince Albert
Confirm the contractor's provincial licence before you hire
Rotary Mud Drilling PVC & Steel Casing Aquifer Testing

MTS Drilling Ltd.

Yard: Saskatoon, SK (131.3 km away)

Confirm the contractor's provincial licence before you hire
Rotary Well Drilling Exploratory Test Holes Pressure Tanks

Wellen Boring & Drilling Ltd.

Yard: Saskatoon, SK (132.9 km away)

★ 5.0 (16 Google reviews)
Large Diameter Bored Wells Drilled Deep Wells Submersible Pumps

Looking for more regional well drillers?

Explore all registered water well contractors operating across SK.

Featured Contractor Spot

Are you a licensed well driller serving Prince Albert?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Prince Albert.

What is the median well depth in Prince Albert?

Among 95 producing water wells with a recorded depth, the median is 41.0 ft (12.4968 m).

Which aquifer is recorded most often in Prince Albert?

The most frequently recorded producing aquifer is 10, on 2 of 2 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities