Fruitvale Well Depths & Groundwater Data (133 Wells)

Bottom Line Up Front

In FRUITVALE the median well is 200 feet deep and draws from Bedrock bedrock, which supplies 109.8% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: low ph, slightly corrosive. Crystalline fractures favor low-alkalinity corrosion.

Modelled Well Depth

200 FT

Median for this area. Typical range 110–305 ft.

Est. Completion Cost

$17,100 CAD

$86/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Low pH, slightly corrosive.

Pump class at this depth: 3/4 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Bedrock (0–500+ ft)

Bedrock

40 ft (Shallow)Median 200 ft500 ft (Deep)

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Hydrogeological Metric	Local Measurement	BC Provincial Benchmark
Total Registered Wells	133	1,420 avg per RM
Median Well Depth	200 ft	118 ft provincial median
Average Well Depth	218.0 ft	137.1 ft provincial average
Recorded Depth Range	30 – 600 ft	2 – 1,201 ft recorded range
Dominant Aquifer	Bedrock	Mixed glacial till province-wide
Estimated Water Hardness	325 mg/L — Very Hard	210 mg/L provincial average
Est. Drilling Cost Range	$6,610 – $17,260 CAD	$110/ft plus mobilization
Domestic Household Use	94% of wells	88% province-wide

Where This Report Applies

Approximate boundary of FRUITVALE

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire FRUITVALE.

Depth Distribution

Most completed wells fall near the median depth of 200 ft.

0-50 ft

8.1% · 13

51-100 ft

23.8% · 38

101-150 ft

11.9% · 19

151-200 ft

13.8% · 22

201-250 ft

11.2% · 18

251-300 ft

8.1% · 13

301-400 ft

13.1% · 21

401+ ft

10% · 16

Median depth of 200 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Undifferentiated Aquifer 109.8%

146 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

Scale build-up in kettles, heaters and fixtures
Dissolved iron and manganese staining
Elevated calcium and magnesium from Bedrock bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970

5 wells · avg 57 ft

1970s

33 wells · avg 188 ft

1980s

16 wells · avg 210 ft

1990s

3 wells · avg 155 ft

2000s

37 wells · avg 245 ft

2010s

12 wells · avg 248 ft

2020s

13 wells · avg 114 ft

47% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, bedrock and a 200 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$2,039

Annual Consumables

$489

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in bedrock, but your own well can sit well off that median.

Sizing: Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment: $349 CAD
Annual Consumables: $349 CAD

Shop this stage Budget option · $39 Premium option · $499

02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing: 52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment: $1,690 CAD
Annual Consumables: $140 CAD

Shop this stage

Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving FRUITVALE?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in FRUITVALE? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in FRUITVALE. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in FRUITVALE.

How deep are water wells in FRUITVALE?

The average water well in FRUITVALE, BC is 218.0 feet deep. Most wells range between 110.0 and 305.0 feet.

What is the primary aquifer in FRUITVALE?

The most common aquifer tapped by drillers in FRUITVALE is Bedrock.