Canada's Well Water Guide
Loading regions
British Columbia • 63 Registered Wells

Crescent Valley Water Well Depth & Hydrogeology

Regional groundwater summary • British Columbia Historical Log Extraction

Bottom Line Up Front

In Crescent Valley, the median completed well is 155 ft deep.

A published hardness range for this place and aquifer is less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃. That is a regional estimate, not a test of your well. Source: Estimate based on B.C. Ministry of Environment water-quality checks.

Most production draws from Unconsolidated (about 43% of local wells).

These municipal aggregates support planning only — they do not replace an accredited laboratory potability test for your own well.

Interactive Well Depth & Modeled Typical Strata

Drag the indicator line or tap a stratum below to read the recorded depth range

Drilling in: Carbonate Bedrock (Limestone / Dolomite) (29–400+ ft)Primary Bedrock Aquifer

Modelled Depth

155 FT

Area median

Drilling cost

$10,850–$23,250

Estimate

Published hardness

less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃

0 ft (Surface)Median 155 ft400 ft (Deep)
Topsoil & Surficial Organics
Glacial Drift Silt & Till
Carbonate Bedrock (Limestone / Dolomite)
Modeled typical strata:

Modeled typical strata — placeholder from median depth + aquifer type; not local driller logs.

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Total Registered Wells 63
Median Well Depth 155 ft
BC benchmark: 162 ft provincial median
Average Well Depth 233.5 ft
Dominant Aquifer Unconsolidated
Hardness less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃ — Estimate. Estimate based on B.C. Ministry of Environment water-quality checks
Drilling cost $10,850–$23,250 — Estimate. Typical drilling prices in Canada, about $70–$150 per foot
Domestic Household Use 86% of wells

Where This Report Applies

Approximate boundary of Crescent Valley

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Crescent Valley.

Depth Distribution

Most completed wells fall near the median depth of 155 ft.

0–49 ft 9.5% · 6
49–98 ft 20.6% · 13
98–148 ft 19% · 12
148–197 ft 4.8% · 3
197–295 ft 14.3% · 9
295–394 ft 11.1% · 7
394–591 ft 14.3% · 9
591+ ft 6.3% · 4

Median depth of 155 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area. Recorded for 34 of these 63 wells.

Undifferentiated Aquifer Regional Formation
42.9%

27 of 63 Unclassified hydrogeological formation from legacy provincial drill records.

Carbonate Bedrock (Limestone / Dolomite) Primary Bedrock Aquifer
11.1%

7 of 63 Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

1 holes found no usable water. test holes, observation or monitoring wells, dewatering wells, decommissioned wells, dry holes, no-aquifer holes, and other non-supply wells filtered out of the headline

Water Quality Profile

A published hardness range, when one exists for this place and aquifer. Not a test of your well.

Estimate

less than 10 to 180, and groundwater can exceed 1,000 mg/L as CaCO₃

Estimate. Estimate based on B.C. Ministry of Environment water-quality checks. Regional estimate, not a test of your well.

Regional District of Nanaimo. Hardness in groundwater (fact sheet citing B.C. Ministry of Environment Water Quality Check Program, 1977–1993).

No measured government test within 25 km. Test your water.

Soft (<60) Med (61–120) Hard (121–180) V. hard (>180)

USGS (2018) bands reprinted by Health Canada. A range can cross more than one band. This is not a sample.

What this is not

  • Not a laboratory result for a well on your property.
  • Not a reason to size a softener. Size equipment from a lab test.
  • Not a drilling quote. A cost line on this page is a national estimate, not a price for one well.

Health Canada has not set a maximum acceptable concentration for hardness. A wide published range can sit in more than one USGS band.

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970 1 wells
1970s 2 wells
1980s 10 wells
1990s 11 wells
2000s 9 wells
2010s 10 wells
2020s 2 wells

Treatment

Size treatment from a laboratory test

This page does not turn a hardness range or a well depth into an equipment total, a grain capacity, or a drilling price. Read the methodology, the filtration guide, and the products catalog.

Suggested system

Suggested system for Crescent Valley

1

Test kit

estimate, confirm with a lab test

A test of your own well comes before any equipment. Test for coliform bacteria.

Water testing
2

Sediment prefilter

estimate, confirm with a lab test

A sediment prefilter is worth considering where wells draw from Unconsolidated. This follows the aquifer type.

Sediment guide
3

UV disinfection

estimate, confirm with a lab test

UV disinfection is worth considering where wells draw from Unconsolidated. Test for coliform bacteria. This follows the aquifer type.

Bacteria and UV guide
Local Contractors

Licensed Water Well Drillers Serving Crescent Valley

Because water wells in Crescent Valley average 155 ft into unconsolidated, contractors equipped with heavy rotary rigs and proper casing seals are recommended. Contact local drillers directly or request competitive bids.

JR Drilling

Yard: Cranbrook, BC (130.1 km away)

Confirm the contractor's provincial licence before you hire
Kootenay Mountain Bedrock Domestic Water Wells Artesian Flow Management

Aqua Source Drilling

Yard: Vernon, BC (151.8 km away)

Confirm the contractor's provincial licence before you hire
Okanagan Aquifers Deep Sand & Gravel Domestic Wells

Bud’s Water Wells Ltd.

Yard: Kamloops, BC (227.4 km away)

Confirm the contractor's provincial licence before you hire
Interior BC Bedrock Submersible Pumps Pressure Tanks

A & H Drilling Ltd.

Yard: Chilliwack, BC (314.9 km away)

Confirm the contractor's provincial licence before you hire
Dual Rotary Drilling Agricultural Irrigation Domestic Wells

Looking for more regional well drillers?

Explore all registered water well contractors operating across BC.

Featured Contractor Spot

Are you a licensed well driller serving Crescent Valley?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing

Frequently Asked Questions

Quick answers about water wells in Crescent Valley.

What is the median well depth in Crescent Valley?

Among 63 producing water wells with a recorded depth, the median is 155.0 ft (47.24 m).

Which aquifer is recorded most often in Crescent Valley?

The most frequently recorded producing aquifer is Unconsolidated, on 27 of 34 wells with a producing aquifer name.

Adjacent Municipalities & Nearby Well Records

Explore neighbouring hydrogeological formations and compare drilling depths

Nearby communities