Canada Well Data
Loading regions
Manitoba 860 Registered Wells

MUNICIPALITY OF GLENELLA-LANSDOWNE Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In MUNICIPALITY OF GLENELLA-LANSDOWNE the median well is 43 feet deep and draws from Sand and Gravel Aquifer bedrock, which supplies 67.4% of wells here. Water is very hard at about 231 mg/L, so a softener is standard equipment. Rotary drilling is routine and 81.7% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

43 FT

Median for this area. Typical range 28–75 ft.

Est. Completion Cost

$5,168 CAD

$120/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

231 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Till (10–120 ft)
Till
Shale
Limestone
40 ft (Shallow)Median 43 ft400 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 860 1,420 avg per RM
Median Well Depth 43 ft 118 ft provincial median
Average Well Depth 59.4 ft 137.1 ft provincial average
Recorded Depth Range 5 – 390 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand and Gravel Aquifer Mixed glacial till province-wide
Estimated Water Hardness 231 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $5,200 – $13,000 CAD $110/ft plus mobilization
Domestic Household Use 82% of wells 88% province-wide

Where This Report Applies

Approximate boundary of MUNICIPALITY OF GLENELLA-LANSDOWNE

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire MUNICIPALITY OF GLENELLA-LANSDOWNE.

Depth Distribution

Most completed wells fall near the median depth of 43 ft.

0-50 ft
57.6% · 491
51-100 ft
27.1% · 231
101-150 ft
9.2% · 78
151-200 ft
4.8% · 41
201-250 ft
0.6% · 5
251-300 ft
0.1% · 1
301-400 ft
0.6% · 5
401+ ft
0% · 0

Median depth of 43 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sand & Gravel Aquifer 67.4%

580 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer 22.4%

193 wells Unclassified hydrogeological formation from legacy provincial drill records.

Glacial Drift Silt & Till 6.4%

55 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Carbonate Rock (Limestone/Dolomite) 1.3%

11 wells Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Odanah / Pierre Shale 1.3%

11 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

231 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand and Gravel Aquifer bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
130 wells · avg 58 ft
1980s
386 wells · avg 54 ft
1990s
115 wells · avg 65 ft
2000s
52 wells · avg 66 ft
2010s
38 wells · avg 79 ft
2020s
9 wells · avg 52 ft

71% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 231 mg/L hardness, sand and gravel aquifer and a 43 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$1,988

Annual Consumables

$579

Softener Sizing

37,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 231 mg/L in sand and gravel aquifer, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

Fleck 5600SXT 32,000 Grain High-Efficiency Softener

required

At 231 mg/L (very hard) a 4-person household loads roughly 4.1k grains of hardness per day onto the plumbing.

Sizing
37,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,090 CAD
Annual Consumables
$110 CAD
03

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 43 ft in sand and gravel aquifer leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving MUNICIPALITY OF GLENELLA-LANSDOWNE?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in MUNICIPALITY OF GLENELLA-LANSDOWNE? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in MUNICIPALITY OF GLENELLA-LANSDOWNE. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in MUNICIPALITY OF GLENELLA-LANSDOWNE.

How deep are water wells in MUNICIPALITY OF GLENELLA-LANSDOWNE?

The average water well in MUNICIPALITY OF GLENELLA-LANSDOWNE, MB is 59.4 feet deep. Most wells range between 28.0 and 75.0 feet.

What is the primary aquifer in MUNICIPALITY OF GLENELLA-LANSDOWNE?

The most common aquifer tapped by drillers in MUNICIPALITY OF GLENELLA-LANSDOWNE is SAND AND GRAVEL.