Canada Well Data
Loading regions
Manitoba 1,824 Registered Wells

RM OF RITCHOT Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In RM OF RITCHOT the median well is 120 feet deep and draws from Carbonate Rock (Limestone/Dolomite) bedrock, which supplies 83.1% of wells here. Water is very hard at about 366 mg/L, so a softener is standard equipment. Rotary drilling is routine and 95.1% of wells serve ordinary household use. Treatment emphasis: scale buildup, calcium/magnesium hardness. Carbonate chemistry creates persistent calcite scaling.

Modelled Well Depth

120 FT

Median for this area. Typical range 100–157 ft.

Est. Completion Cost

$11,020 CAD

$92/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

366 MG/L

Extremely Hard. Scale buildup, calcium/magnesium hardness.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Limestone (70–575+ ft)
Limestone
40 ft (Shallow)Median 120 ft575 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 1,824 1,420 avg per RM
Median Well Depth 120 ft 118 ft provincial median
Average Well Depth 142.7 ft 137.1 ft provincial average
Recorded Depth Range 8 – 575 ft 2 – 1,201 ft recorded range
Dominant Aquifer Carbonate Rock (Limestone/Dolomite) Mixed glacial till province-wide
Estimated Water Hardness 366 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $8,500 – $15,775 CAD $110/ft plus mobilization
Domestic Household Use 95% of wells 88% province-wide

Where This Report Applies

Approximate boundary of RM OF RITCHOT

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire RM OF RITCHOT.

Depth Distribution

Most completed wells fall near the median depth of 120 ft.

0-50 ft
1.8% · 28
51-100 ft
25.4% · 390
101-150 ft
44.9% · 688
151-200 ft
12.5% · 191
201-250 ft
5.7% · 88
251-300 ft
4.4% · 67
301-400 ft
5.2% · 80
401+ ft
0.1% · 1

Median depth of 120 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Carbonate Rock (Limestone/Dolomite) 83.1%

1,516 wells Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Undifferentiated Aquifer 14.6%

267 wells Unclassified hydrogeological formation from legacy provincial drill records.

Sand & Gravel Aquifer 1.8%

32 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Winnipeg Sandstone Aquifer 0.3%

5 wells Deep basal sandstone bedrock unit. Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Glacial Drift Silt & Till 0.2%

4 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

366 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Carbonate Rock (Limestone/Dolomite) bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
354 wells · avg 123 ft
1980s
292 wells · avg 135 ft
1990s
278 wells · avg 160 ft
2000s
237 wells · avg 150 ft
2010s
131 wells · avg 182 ft
2020s
84 wells · avg 166 ft

49% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 366 mg/L hardness, carbonate rock (limestone/dolomite) and a 120 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$4,578

Annual Consumables

$639

Softener Sizing

58,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 366 mg/L in carbonate rock (limestone/dolomite), but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Iron, Manganese & Sulfur

SpringWell WS1 Air-Injection Iron & Manganese Filter

recommended

Dissolved iron and manganese are the routine complaint on carbonate rock (limestone/dolomite) wells — they stain fixtures and foul softener resin if not removed first.

Sizing
Air-injection oxidation, chemical-free, ahead of the softener
Equipment
$1,990 CAD
Annual Consumables
$60 CAD
03

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 366 mg/L (very hard) a 4-person household loads roughly 6.4k grains of hardness per day onto the plumbing.

Sizing
58,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
04

Drinking Water RO

AquaTru Countertop Reverse Osmosis Purifier

optional

With total dissolved solids tracking 366 mg/L hardness, a drinking-water polish is the cheapest quality-of-life upgrade in the stack.

Sizing
5-stage under-sink RO at the kitchen cold tap
Equipment
$549 CAD
Annual Consumables
$90 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving RM OF RITCHOT?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in RM OF RITCHOT? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in RM OF RITCHOT. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in RM OF RITCHOT.

How deep are water wells in RM OF RITCHOT?

The average water well in RM OF RITCHOT, MB is 142.7 feet deep. Most wells range between 100.0 and 157.0 feet.

What is the primary aquifer in RM OF RITCHOT?

The most common aquifer tapped by drillers in RM OF RITCHOT is LIMESTONE OR DOLOMITE.