Canada Well Data
Loading regions
Manitoba 1,085 Registered Wells

RM OF STUARTBURN Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In RM OF STUARTBURN the median well is 90 feet deep and draws from Sand and Gravel Aquifer bedrock, which supplies 68.3% of wells here. Water is very hard at about 264 mg/L, so a softener is standard equipment. Rotary drilling is routine and 81.5% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

90 FT

Median for this area. Typical range 56–158 ft.

Est. Completion Cost

$8,740 CAD

$97/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

264 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Clay (10–100 ft)
Clay
Silt
Shale
40 ft (Shallow)Median 90 ft550 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 1,085 1,420 avg per RM
Median Well Depth 90 ft 118 ft provincial median
Average Well Depth 108.4 ft 137.1 ft provincial average
Recorded Depth Range 2 – 550 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand and Gravel Aquifer Mixed glacial till province-wide
Estimated Water Hardness 264 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,080 – $15,850 CAD $110/ft plus mobilization
Domestic Household Use 82% of wells 88% province-wide

Where This Report Applies

Approximate boundary of RM OF STUARTBURN

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire RM OF STUARTBURN.

Depth Distribution

Most completed wells fall near the median depth of 90 ft.

0-50 ft
22.7% · 215
51-100 ft
33.6% · 319
101-150 ft
16.1% · 153
151-200 ft
18.3% · 174
201-250 ft
5.1% · 48
251-300 ft
1.8% · 17
301-400 ft
1.8% · 17
401+ ft
0.6% · 6

Median depth of 90 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sand & Gravel Aquifer 68.3%

741 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer 26.5%

288 wells Unclassified hydrogeological formation from legacy provincial drill records.

Carbonate Rock (Limestone/Dolomite) 2.9%

31 wells Major regional bedrock aquifer formed by Ordovician/Silurian dolomite. Known for reliable, high-volume yields with elevated mineral hardness and dissolved calcium/magnesium carbonates.

Glacial Drift Silt & Till 1.7%

18 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Winnipeg Sandstone Aquifer 0.5%

5 wells Deep basal sandstone bedrock unit. Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

264 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand and Gravel Aquifer bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
117 wells · avg 113 ft
1980s
215 wells · avg 103 ft
1990s
169 wells · avg 116 ft
2000s
192 wells · avg 92 ft
2010s
114 wells · avg 128 ft
2020s
86 wells · avg 122 ft

46% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 264 mg/L hardness, sand and gravel aquifer and a 90 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$2,039

Annual Consumables

$489

Softener Sizing

42,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 264 mg/L in sand and gravel aquifer, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 264 mg/L (very hard) a 4-person household loads roughly 4.6k grains of hardness per day onto the plumbing.

Sizing
42,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving RM OF STUARTBURN?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in RM OF STUARTBURN? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in RM OF STUARTBURN. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in RM OF STUARTBURN.

How deep are water wells in RM OF STUARTBURN?

The average water well in RM OF STUARTBURN, MB is 108.4 feet deep. Most wells range between 56.0 and 158.0 feet.

What is the primary aquifer in RM OF STUARTBURN?

The most common aquifer tapped by drillers in RM OF STUARTBURN is SAND AND GRAVEL.