TOWN OF MINNEDOSA Water Well Depth & Hydrogeology
Regional groundwater summary • GWDrill Historical Log Extraction
Bottom Line Up Front
In TOWN OF MINNEDOSA the median well is 62 feet deep and draws from Sand and Gravel Aquifer bedrock, which supplies 48.1% of wells here. Water is very hard at about 255 mg/L, so a softener is standard equipment. Rotary drilling is routine and 87.2% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.
Modelled Well Depth
62 FT
Median for this area. Typical range 41–120 ft.
Est. Completion Cost
$6,612 CAD
$107/ft effective rate (includes fixed $1,900 mobilization & pump installation).
Water Hardness
255 MG/L
Very Hard. Sediment turbidity, localized iron/manganese.
Pump class at this depth: 1/2 HP submersible, 4" casing
Adjust Target Depth
Drag the yellow indicator across the strata bar
Well Statistics
Local measurements compared against Manitoba provincial benchmarks.
| Hydrogeological Metric | Local Measurement | MB Provincial Benchmark |
|---|---|---|
| Total Registered Wells | 81 | 1,420 avg per RM |
| Median Well Depth | 62 ft | 118 ft provincial median |
| Average Well Depth | 92.6 ft | 137.1 ft provincial average |
| Recorded Depth Range | 16 – 470 ft | 2 – 1,201 ft recorded range |
| Dominant Aquifer | Sand and Gravel Aquifer | Mixed glacial till province-wide |
| Estimated Water Hardness | 255 mg/L — Very Hard | 210 mg/L provincial average |
| Est. Drilling Cost Range | $5,255 – $13,000 CAD | $110/ft plus mobilization |
| Domestic Household Use | 87% of wells | 88% province-wide |
Where This Report Applies
Approximate boundary of TOWN OF MINNEDOSA
Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire TOWN OF MINNEDOSA.
Depth Distribution
Most completed wells fall near the median depth of 62 ft.
Median depth of 62 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.
Aquifer Composition
Bedrock and drift aquifers recorded by drillers in this area.
39 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.
26 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.
14 wells Unclassified hydrogeological formation from legacy provincial drill records.
1 wells Eastern Manitoba crystalline rock. Yields soft, slightly acidic water with minimal dissolved solids.
Water Quality Profile
Estimated hardness, mineral risks and treatment implications.
Total Hardness
Very Hard255 MG/L
as CaCO3, Health Canada scale
Present Mineral Risk
- Scale build-up in kettles, heaters and fixtures
- Dissolved iron and manganese staining
- Elevated calcium and magnesium from Sand and Gravel Aquifer bedrock
Test before purchasing treatment. Hardness varies well to well within the same quarter section.
Size custom treatment system for this waterDrilling Activity
Historical permit and construction activity by decade.
37% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.
Data-Driven Prescription
The treatment system this water needs
Generated from 255 mg/L hardness, sand and gravel aquifer and a 62 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.
Equipment Total
$2,588
Annual Consumables
$609
Softener Sizing
41,000 gr
Water Testing
Tap Score Canadian Essential Water Test
Nothing gets sized without numbers. Regional modelling puts hardness near 255 mg/L in sand and gravel aquifer, but your own well can sit well off that median.
- Sizing
- Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
- Equipment
- $349 CAD
- Annual Consumables
- $349 CAD
Whole-Home Softening
SpringWell SS1 48,000 Grain Whole-Home Softener
At 255 mg/L (very hard) a 4-person household loads roughly 4.5k grains of hardness per day onto the plumbing.
- Sizing
- 41,000 grain metered capacity — about a 7-day regeneration cycle with reserve
- Equipment
- $1,690 CAD
- Annual Consumables
- $140 CAD
UV Disinfection
iSpring UVF55FS 12 GPM Whole-House UV Disinfection System
Median completion depth of 62 ft in sand and gravel aquifer leaves this aquifer surface-influenced, which is where coliform hits come from.
- Sizing
- 12 GPM UV, installed last in the treatment train, downstream of all filtration
- Equipment
- $549 CAD
- Annual Consumables
- $120 CAD
Featured Contractor Spot
Are you a licensed well driller serving TOWN OF MINNEDOSA?
Claim your verified listing profile and be found by homeowners on this report.
Instant WellCheck™ Property Dossier
Buying rural acreage or a home in TOWN OF MINNEDOSA? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.
Planning to Drill?
Get three free drilling quotes
Matched to contractors who already drill in TOWN OF MINNEDOSA. Compare casing sizes, depth guarantees, and mobilization fees.
Frequently Asked Questions
Quick answers about water wells in TOWN OF MINNEDOSA.
How deep are water wells in TOWN OF MINNEDOSA?
The average water well in TOWN OF MINNEDOSA, MB is 92.6 feet deep. Most wells range between 41.0 and 120.0 feet.
What is the primary aquifer in TOWN OF MINNEDOSA?
The most common aquifer tapped by drillers in TOWN OF MINNEDOSA is SAND AND GRAVEL.