Canada Well Data
Loading regions
Manitoba 691 Registered Wells

RM OF OAKVIEW Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In RM OF OAKVIEW the median well is 80 feet deep and draws from Sand and Gravel Aquifer bedrock, which supplies 53.7% of wells here. Water is very hard at about 237 mg/L, so a softener is standard equipment. Rotary drilling is routine and 82.4% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

80 FT

Median for this area. Typical range 30–150 ft.

Est. Completion Cost

$7,980 CAD

$100/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

237 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Clay (0–100 ft)
Clay
Shale
Sand
40 ft (Shallow)Median 80 ft420 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 691 1,420 avg per RM
Median Well Depth 80 ft 118 ft provincial median
Average Well Depth 105.4 ft 137.1 ft provincial average
Recorded Depth Range 5 – 420 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand and Gravel Aquifer Mixed glacial till province-wide
Estimated Water Hardness 237 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $5,200 – $15,250 CAD $110/ft plus mobilization
Domestic Household Use 82% of wells 88% province-wide

Where This Report Applies

Approximate boundary of RM OF OAKVIEW

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire RM OF OAKVIEW.

Depth Distribution

Most completed wells fall near the median depth of 80 ft.

0-50 ft
37.1% · 255
51-100 ft
21.8% · 150
101-150 ft
17.7% · 122
151-200 ft
8% · 55
201-250 ft
5.7% · 39
251-300 ft
4.8% · 33
301-400 ft
4.8% · 33
401+ ft
0.1% · 1

Median depth of 80 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sand & Gravel Aquifer 53.7%

371 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Undifferentiated Aquifer 24.5%

169 wells Unclassified hydrogeological formation from legacy provincial drill records.

Odanah / Pierre Shale 20%

138 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Glacial Drift Silt & Till 1.7%

12 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Winnipeg Sandstone Aquifer 0.1%

1 wells Deep basal sandstone bedrock unit. Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

237 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand and Gravel Aquifer bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
117 wells · avg 103 ft
1980s
157 wells · avg 76 ft
1990s
125 wells · avg 94 ft
2000s
54 wells · avg 143 ft
2010s
28 wells · avg 136 ft
2020s
14 wells · avg 92 ft

48% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 237 mg/L hardness, sand and gravel aquifer and a 80 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$1,988

Annual Consumables

$579

Softener Sizing

38,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 237 mg/L in sand and gravel aquifer, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

Fleck 5600SXT 32,000 Grain High-Efficiency Softener

required

At 237 mg/L (very hard) a 4-person household loads roughly 4.2k grains of hardness per day onto the plumbing.

Sizing
38,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,090 CAD
Annual Consumables
$110 CAD
03

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 80 ft in sand and gravel aquifer leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving RM OF OAKVIEW?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in RM OF OAKVIEW? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in RM OF OAKVIEW. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in RM OF OAKVIEW.

How deep are water wells in RM OF OAKVIEW?

The average water well in RM OF OAKVIEW, MB is 105.4 feet deep. Most wells range between 30.0 and 150.0 feet.

What is the primary aquifer in RM OF OAKVIEW?

The most common aquifer tapped by drillers in RM OF OAKVIEW is SAND AND GRAVEL.