Canada Well Data
Loading regions
British Columbia 55 Registered Wells

Elko Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In Elko the median well is 238 feet deep and draws from Sand & Gravel Drift bedrock, which supplies 150.9% of wells here. Water is very hard at about 325 mg/L, so a softener is standard equipment. Rotary drilling is routine and 94% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

238 FT

Median for this area. Typical range 196–378 ft.

Est. Completion Cost

$19,988 CAD

$84/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

325 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 1 HP submersible, deep-set drop pipe

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Sand & Gravel Drift (0–600+ ft)
Sand & Gravel Drift
40 ft (Shallow)Median 238 ft600 ft (Deep)

Well Statistics

Local measurements compared against British Columbia provincial benchmarks.

Hydrogeological Metric Local Measurement BC Provincial Benchmark
Total Registered Wells 55 1,420 avg per RM
Median Well Depth 238 ft 118 ft provincial median
Average Well Depth 283.2 ft 137.1 ft provincial average
Recorded Depth Range 39 – 598 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand & Gravel Drift Mixed glacial till province-wide
Estimated Water Hardness 325 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $6,610 – $17,260 CAD $110/ft plus mobilization
Domestic Household Use 94% of wells 88% province-wide

Where This Report Applies

Approximate boundary of Elko

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire Elko.

Depth Distribution

Most completed wells fall near the median depth of 238 ft.

0-50 ft
5.1% · 6
51-100 ft
11.1% · 13
101-150 ft
12% · 14
151-200 ft
16.2% · 19
201-250 ft
24.8% · 29
251-300 ft
10.3% · 12
301-400 ft
7.7% · 9
401+ ft
12.8% · 15

Median depth of 238 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Undifferentiated Aquifer 150.9%

83 wells Unclassified hydrogeological formation from legacy provincial drill records.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

325 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand & Gravel Drift bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
13 wells · avg 173 ft
1970s
10 wells · avg 245 ft
1980s
6 wells · avg 138 ft
1990s
1 wells · avg 300 ft
2000s
16 wells · avg 181 ft
2010s
22 wells · avg 234 ft
2020s
34 wells · avg 320 ft

29% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 325 mg/L hardness, sand & gravel drift and a 238 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$3,337

Annual Consumables

$609

Softener Sizing

52,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 325 mg/L in sand & gravel drift, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Sediment Prefilter

SpringWell Whole-House Spin-Down Sediment Filter

recommended

Sand & Gravel Drift aquifers carry fine sand and turbidity that destroys softener resin and UV lamp clarity.

Sizing
Prefilter, 20 micron, ahead of all treatment
Equipment
$749 CAD
Annual Consumables
None
03

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 325 mg/L (very hard) a 4-person household loads roughly 5.7k grains of hardness per day onto the plumbing.

Sizing
52,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
04

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 238 ft in sand & gravel drift leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving Elko?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in Elko? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in Elko. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in Elko.

How deep are water wells in Elko?

The average water well in Elko, BC is 283.2 feet deep. Most wells range between 196.0 and 378.0 feet.

What is the primary aquifer in Elko?

The most common aquifer tapped by drillers in Elko is Sand & Gravel Drift.