Canada Well Data
Loading regions
Manitoba 448 Registered Wells

MUNICIPALITY OF ETHELBERT Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In MUNICIPALITY OF ETHELBERT the median well is 54 feet deep and draws from Undifferentiated Aquifer bedrock, which supplies 46.2% of wells here. Water is very hard at about 305 mg/L, so a softener is standard equipment. Rotary drilling is routine and 77.3% of wells serve ordinary household use. Treatment emphasis: standard regional mineral profile. Local sampling should confirm the unresolved formation profile.

Modelled Well Depth

54 FT

Median for this area. Typical range 30–140 ft.

Est. Completion Cost

$6,004 CAD

$111/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

305 MG/L

Very Hard. Standard regional mineral profile.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Shale (20–110 ft)
Shale
Sandstone
40 ft (Shallow)Median 54 ft424 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 448 1,420 avg per RM
Median Well Depth 54 ft 118 ft provincial median
Average Well Depth 91.5 ft 137.1 ft provincial average
Recorded Depth Range 7 – 424 ft 2 – 1,201 ft recorded range
Dominant Aquifer Undifferentiated Aquifer Mixed glacial till province-wide
Estimated Water Hardness 305 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $5,200 – $14,500 CAD $110/ft plus mobilization
Domestic Household Use 77% of wells 88% province-wide

Where This Report Applies

Approximate boundary of MUNICIPALITY OF ETHELBERT

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire MUNICIPALITY OF ETHELBERT.

Depth Distribution

Most completed wells fall near the median depth of 54 ft.

0-50 ft
49.2% · 163
51-100 ft
17.2% · 57
101-150 ft
12.4% · 41
151-200 ft
11.2% · 37
201-250 ft
4.5% · 15
251-300 ft
3% · 10
301-400 ft
1.5% · 5
401+ ft
0.9% · 3

Median depth of 54 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Undifferentiated Aquifer 46.2%

207 wells Unclassified hydrogeological formation from legacy provincial drill records.

Sand & Gravel Aquifer 27.2%

122 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Winnipeg Sandstone Aquifer 15.8%

71 wells Deep basal sandstone bedrock unit. Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Odanah / Pierre Shale 7.6%

34 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Glacial Drift Silt & Till 2.7%

12 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

305 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Undifferentiated Aquifer bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
44 wells · avg 53 ft
1980s
65 wells · avg 77 ft
1990s
38 wells · avg 113 ft
2000s
52 wells · avg 105 ft
2010s
15 wells · avg 95 ft
2020s
14 wells · avg 154 ft

40% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 305 mg/L hardness, undifferentiated aquifer and a 54 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$2,588

Annual Consumables

$609

Softener Sizing

49,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 305 mg/L in undifferentiated aquifer, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

SpringWell SS1 48,000 Grain Whole-Home Softener

required

At 305 mg/L (very hard) a 4-person household loads roughly 5.4k grains of hardness per day onto the plumbing.

Sizing
49,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,690 CAD
Annual Consumables
$140 CAD
03

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 54 ft in undifferentiated aquifer leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving MUNICIPALITY OF ETHELBERT?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in MUNICIPALITY OF ETHELBERT? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in MUNICIPALITY OF ETHELBERT. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in MUNICIPALITY OF ETHELBERT.

How deep are water wells in MUNICIPALITY OF ETHELBERT?

The average water well in MUNICIPALITY OF ETHELBERT, MB is 91.5 feet deep. Most wells range between 30.0 and 140.0 feet.

What is the primary aquifer in MUNICIPALITY OF ETHELBERT?

The most common aquifer tapped by drillers in MUNICIPALITY OF ETHELBERT is UNKNOWN.