Canada Well Data
Loading regions
Manitoba 1,117 Registered Wells

MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN Water Well Depth & Hydrogeology

Regional groundwater summary • GWDrill Historical Log Extraction

Bottom Line Up Front

In MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN the median well is 75 feet deep and draws from Sand and Gravel Aquifer bedrock, which supplies 54.9% of wells here. Water is very hard at about 253 mg/L, so a softener is standard equipment. Rotary drilling is routine and 85.1% of wells serve ordinary household use. Treatment emphasis: sediment turbidity, localized iron/manganese. Unconsolidated sediments demand particulate intrusion monitoring.

Modelled Well Depth

75 FT

Median for this area. Typical range 45–150 ft.

Est. Completion Cost

$7,600 CAD

$101/ft effective rate (includes fixed $1,900 mobilization & pump installation).

Water Hardness

253 MG/L

Very Hard. Sediment turbidity, localized iron/manganese.

Pump class at this depth: 1/2 HP submersible, 4" casing

Adjust Target Depth

Drag the yellow indicator across the strata bar

Representative Geological StrataDrilling in: Shale (40–300 ft)
Shale
Sand and Gravel
40 ft (Shallow)Median 75 ft410 ft (Deep)

Well Statistics

Local measurements compared against Manitoba provincial benchmarks.

Hydrogeological Metric Local Measurement MB Provincial Benchmark
Total Registered Wells 1,117 1,420 avg per RM
Median Well Depth 75 ft 118 ft provincial median
Average Well Depth 101.6 ft 137.1 ft provincial average
Recorded Depth Range 6 – 410 ft 2 – 1,201 ft recorded range
Dominant Aquifer Sand and Gravel Aquifer Mixed glacial till province-wide
Estimated Water Hardness 253 mg/L — Very Hard 210 mg/L provincial average
Est. Drilling Cost Range $5,475 – $15,250 CAD $110/ft plus mobilization
Domestic Household Use 85% of wells 88% province-wide

Where This Report Applies

Approximate boundary of MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN

Shaded area is an approximate municipal outline for orientation only. Well records are aggregated across the entire MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN.

Depth Distribution

Most completed wells fall near the median depth of 75 ft.

0-50 ft
31.2% · 322
51-100 ft
33.1% · 342
101-150 ft
11.1% · 115
151-200 ft
11.4% · 118
201-250 ft
8.8% · 91
251-300 ft
3.2% · 33
301-400 ft
1.1% · 11
401+ ft
0.1% · 1

Median depth of 75 ft falls inside the reported range. Deeper completions here usually mean higher mineral content but steadier year-round pressure.

Aquifer Composition

Bedrock and drift aquifers recorded by drillers in this area.

Sand & Gravel Aquifer 54.9%

613 wells Shallow to intermediate glacial drift aquifer deposited in alluvial channels or outwash plains. Yields softer water but requires continuous sediment filtration and shallow bacterial monitoring.

Odanah / Pierre Shale 21.6%

241 wells Fractured Cretaceous shale formation prominent in western Manitoba. Characterized by high total dissolved solids (TDS) and potential sulfur/iron compounds.

Undifferentiated Aquifer 20.5%

229 wells Unclassified hydrogeological formation from legacy provincial drill records.

Winnipeg Sandstone Aquifer 1.8%

20 wells Deep basal sandstone bedrock unit. Supplies exceptionally stable yields; often exhibits moderate mineral hardness with silica-rich water.

Glacial Drift Silt & Till 1.1%

12 wells Low-permeability clay-rich glacial deposits with localized sand lenses. Often slow recharge.

Water Quality Profile

Estimated hardness, mineral risks and treatment implications.

Total Hardness

Very Hard

253 MG/L

as CaCO3, Health Canada scale

Soft Moderate Hard Very hard

Present Mineral Risk

  • Scale build-up in kettles, heaters and fixtures
  • Dissolved iron and manganese staining
  • Elevated calcium and magnesium from Sand and Gravel Aquifer bedrock

Test before purchasing treatment. Hardness varies well to well within the same quarter section.

Size custom treatment system for this water

Drilling Activity

Historical permit and construction activity by decade.

Pre-1970
0 wells on record
1970s
216 wells · avg 114 ft
1980s
212 wells · avg 90 ft
1990s
150 wells · avg 94 ft
2000s
185 wells · avg 112 ft
2010s
84 wells · avg 98 ft
2020s
45 wells · avg 111 ft

49% of wells are over 30 years old. Steel casing installed before 1995 can lose integrity, so any older well should get a casing inspection and a bacterial test before you rely on it.

Affiliate & Editorial Disclosure: In accordance with the Competition Bureau of Canada and FTC guidelines, please note that links to filtration equipment and test kits are affiliate links. If you purchase through our links, Canada Well Data may earn a commission at no extra cost to you. Recommendations are generated independently from regional well records and Health Canada GCDWQ standards. Learn more about our affiliate and editorial disclosure policy.

Data-Driven Prescription

The treatment system this water needs

Generated from 253 mg/L hardness, sand and gravel aquifer and a 75 ft median completion depth, for a four-person household. Adjust the assumptions in the builder.

Equipment Total

$1,988

Annual Consumables

$579

Softener Sizing

40,000 gr

01

Water Testing

Tap Score Canadian Essential Water Test

required

Nothing gets sized without numbers. Regional modelling puts hardness near 253 mg/L in sand and gravel aquifer, but your own well can sit well off that median.

Sizing
Accredited lab panel: hardness, iron, manganese, nitrate, arsenic, total coliform and E. coli
Equipment
$349 CAD
Annual Consumables
$349 CAD
02

Whole-Home Softening

Fleck 5600SXT 32,000 Grain High-Efficiency Softener

required

At 253 mg/L (very hard) a 4-person household loads roughly 4.4k grains of hardness per day onto the plumbing.

Sizing
40,000 grain metered capacity — about a 7-day regeneration cycle with reserve
Equipment
$1,090 CAD
Annual Consumables
$110 CAD
03

UV Disinfection

iSpring UVF55FS 12 GPM Whole-House UV Disinfection System

recommended

Median completion depth of 75 ft in sand and gravel aquifer leaves this aquifer surface-influenced, which is where coliform hits come from.

Sizing
12 GPM UV, installed last in the treatment train, downstream of all filtration
Equipment
$549 CAD
Annual Consumables
$120 CAD
Tune this to my household

Featured Contractor Spot

Are you a licensed well driller serving MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN?

Claim your verified listing profile and be found by homeowners on this report.

Claim Local Listing
Property Due Diligence $39 CAD

Instant WellCheck™ Property Dossier

Buying rural acreage or a home in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN? Get an automated 12-page comprehensive property report analyzing all adjacent well logs, lithology strata, aquifer vulnerability, pump test yields, and water hardness risks.

Generate Property Dossier ($39)

Planning to Drill?

Get three free drilling quotes

Matched to contractors who already drill in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN. Compare casing sizes, depth guarantees, and mobilization fees.

Request Free Quotes

Frequently Asked Questions

Quick answers about water wells in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN.

How deep are water wells in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN?

The average water well in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN, MB is 101.6 feet deep. Most wells range between 45.0 and 150.0 feet.

What is the primary aquifer in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN?

The most common aquifer tapped by drillers in MUNICIPALITY OF KILLARNEY-TURTLE MOUNTAIN is SAND AND GRAVEL.